DYN-OPTICS Model 955 Fire Finder II

New, small, lightweight, sensitive and patented version of the infrared
heat scanner made by DYN-OPTICS for 20 years.

Fire Finder's infrared heat sensor will detect a small hot spot that the firefighter's eyes may miss - even through a glass window. Helps prevent rekindling during mop-up.
Operates in full sunlight or in a dense smoke filled room.
Gives an instantaneous audible alarm where the pitch is proportional to the temperature of the hot spot or fire.
Indicates the way to the fire area without demanding any eye attention.
Includes audible self-test to verify operation of batteries, detector and electronics.
Detects super-heated air prior to flashover.
Detects invisible chemical flame.
Low battery warning.
U.S. Government CAGE CODE.

SPECIFICATIONS

Sensitivity - Responds to 200 degrees F hot area one foot square at 20 feet.
Heat Indication - An audible alarm will sound when the FIRE FINDER II is pointed at a hot spot. The pitch of the alarm is proportional to the temperature - the higher the temperature, the higher the pitch.
Sensitivity to sunlight - Detects a cigarette on a hot sidewalk in full sunlight.
Response Time - Less than 0.1 second to full audible alarm.
Construction - Durable water resistant aluminum housing. No plastic components.
Operation - Simple on-off switch.
Built-in self-test - Initiated when unit is turned on to assure the operator unit is functioning properly.
Power - Four 1.5 volt AA batteries that can easily be replaced by removing rear cover.

USES

Verifies fire is extinguished
Seeks out residual embers in full sunlight
Detects transparent chemical fire during haz-mat incidences
Finds hot spots
Locates overheated ballasts in fluorescent lights
Identifies overheated machinery
Spots hot wiring
Prevents rekindle by locating residual embers during overhaul

TESTIMONIALS

"Fire Finder was very effective and compatible with shipboard environment."
"We were so satisfied that we purchased one for each truck; it increased mop-up effectiveness."
"Shows need for complete extinguishment and overhaul."
"Valuable in locating hot spots that are inaccessible."
"Fire Finder is one of the finest job and time saving pieces of equipment we have."
"Fire Finder is easy to operate. Our people prefer it to the thermal imager camera....at a lot less money."

WARRANTY

Three year limited warranty for parts and labor when used as directed.

The original Fire Finder was developed by Dyn-Optics in 1980 and has been upgraded on several occasions. The current compact and lightweight Fire Finder II Model 955 reflects the latest electronic state-of-the-art components. The Fire Finder II incorporates two new features: 1) the HELP WANTED ALARM activated by the firefighter and 2) a BATTERIES NEED CHANGING ALARM. In addition, the Fire Finder II Model 955 has been tested and certified intrinsically safe to be used in explosive environments, in conformity with MIL-STD-202F, method 109B.

Dyn-Optics has a patent on the Fire Finder. Any other device representing to be a Fire Finder or heat sensor may be counterfeit or infringe on the patent.

Call, write, FAX, or email Dyn-Optics for additional technical information, specifications or price quotation. You may also contact your local distributor for additional information.

DYN-OPTICS FIRE SERVICES GROUP
22971 TRITON WAY, UNIT B
LAGUNA HILLS, CA 92653-1229
TELEPHONE: (949) 581-7430
FAX: (949) 581-8468
EMAIL:mailto:info@dyn-optics.com